| About |
|---|
| SABIC® LDPE HP2024NDF is a grade typically used in foam applications. It is without slip and anti-block additives. SABIC® LDPE HP2024NDF is produced by CTR® tubular production technology with outstanding draw down properties, low odor and taste levels. This grades is ideally suitable for crosslink- and non-crosslink foaming processes using both physical and chemical blowing agents. |
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | LDPE |
| Material Status | Commercial: Active |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.924 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 2.0 | g/10min | ISO 1133 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 96.0 | ℃ | ASTM D1525 1 |
| Melting temperature | 111 | ℃ | |
| Crystallization peak temperature | 98 | °C | ISO 11357-3 |
| Average Heat of Fusion | 114 | J/g | ISO 11357-3 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 46 | ASTM D2240 | |
| Tensile modulus | 290 | MPa | Internal Method |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |