SABIC® LDPE PCG01

About
SABIC® LDPE PCG01 SABIC® LDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® LDPE PCG01 is an additive-free grade produced using SABIC’s proprietary high pressure Clean Tubular Reactor (CTR®) which typically ensures grades with high purity. It is typically used for semi-rigid containers obtained by Blow Fill Seal (BFS) process and medical films. Compliance to Regulations SABIC® LDPE PCG01 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI).&&SABIC® LDPE PCG01 Low density polyethylene for Healthcare Description SABIC® LDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® LDPE PCGO1 is an additive free grade, typically designed for healthcare packaging and can typically be converted by Blow Fill Seal, Blow Molding and Blown Film to produce ampoules, bottles, but also intermediate packaging (bags) for active pharmaceutical ingredients and secondary packaging. It combines good optical properties and high stiffness. Compliance to Regulations SABIC® LDPE PCGO1 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI). The product mentioned herein may not be used for medical healthcare devices or materials intended for temporary or permanent implementation in the human body.&&

About

SABIC® LDPE PCG01 SABIC® LDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® LDPE PCG01 is an additive-free grade produced using SABIC’s proprietary high pressure Clean Tubular Reactor (CTR®) which typically ensures grades with high purity. It is typically used for semi-rigid containers obtained by Blow Fill Seal (BFS) process and medical films. Compliance to Regulations SABIC® LDPE PCG01 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI).&&SABIC® LDPE PCG01 Low density polyethylene for Healthcare Description SABIC® LDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® LDPE PCGO1 is an additive free grade, typically designed for healthcare packaging and can typically be converted by Blow Fill Seal, Blow Molding and Blown Film to produce ampoules, bottles, but also intermediate packaging (bags) for active pharmaceutical ingredients and secondary packaging. It combines good optical properties and high stiffness. Compliance to Regulations SABIC® LDPE PCGO1 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI). The product mentioned herein may not be used for medical healthcare devices or materials intended for temporary or permanent implementation in the human body.&&

Product Description
Supplier	SABIC
Generic	LDPE
Material Status	Commercial: Active
Features	Good Rigidity,High purity,Optical performance,Low density
Availabilitys	North America,Latin America,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.925	g/cm³	ISO 1183/A
Melt Flow Rate
190℃，2.16kg	0.75	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
friction coefficient	0.90		ASTM D1894

film	Nominal value	Unit	Test method
Tensile modulus			ISO 527-3
MD	200	MPa	ISO 527-3
TD	200	MPa	ISO 527-3
tensile strength			ISO 527-3
MD, yield	12.0	MPa	ISO 527-3
TD, yield	12.0	MPa	ISO 527-3
MD, fracture	25.0	MPa	ISO 527-3
TD, fracture	20.0	MPa	ISO 527-3
Tensile strain			ISO 527-3
MD, fracture	> 200	%	ISO 527-3
TD, fracture	> 500	%	ISO 527-3

IMPACT	Nominal value	Unit	Test method
Izod notched impact strength	150	J/cm	ASTM D4272

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	98.0	℃	ISO 306/A
Melting temperature
DSC	113	℃	DIN 53765

optical performance	Nominal value	Unit	Test method
gloss
45°	55		ASTM D2457
Haze	10	%	ASTM D1003A

Supplementary information	Nominal value	Unit	Test method
Blocking force	20	g	Internal Method
Re（blocking）	< 5.0	g	Internal Method
tear strength			ISO 6383-2
MD	45.0	kN/m	ISO 6383-2
TD	45.0	kN/m	ISO 6383-2

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.