SABIC® LDPE PCG07

About
SABIC® LDPE PCG07 SABIC® LDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® LDPE PCG07 is an additive free grade, typically designed for healthcare packaging and can typically be converted by Injection Molding and Cast Film to produce caps and closures and secondary packaging. Compliance to Regulations SABIC® LDPE PCG07 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI).&&SABIC® LDPE PCG07 Low density polyethylene for Healthcare Description SABIC® LDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® LDPE PCG07 is an additive free grade, typically designed for healthcare packaging and can typically be converted by Injection Molding and Cast Film to produce caps and closures and secondary packaging. Compliance to Regulations SABIC® LDPE PCG07 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI). The product mentioned herein may not be used for medical healthcare devices or materials intended for temporary or permanent implementation in the human body.&&

About

SABIC® LDPE PCG07 SABIC® LDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® LDPE PCG07 is an additive free grade, typically designed for healthcare packaging and can typically be converted by Injection Molding and Cast Film to produce caps and closures and secondary packaging. Compliance to Regulations SABIC® LDPE PCG07 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI).&&SABIC® LDPE PCG07 Low density polyethylene for Healthcare Description SABIC® LDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® LDPE PCG07 is an additive free grade, typically designed for healthcare packaging and can typically be converted by Injection Molding and Cast Film to produce caps and closures and secondary packaging. Compliance to Regulations SABIC® LDPE PCG07 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI). The product mentioned herein may not be used for medical healthcare devices or materials intended for temporary or permanent implementation in the human body.&&

Product Description
Supplier	SABIC
Generic	LDPE
Material Status	Commercial: Active
Features	High purity,Low density
Availabilitys	North America,Latin America,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.920	g/cm³	ISO 1183
Melt Flow Rate
190℃，2.16kg	7.5	g/10min	ISO 1133
190℃，5.0kg	25	g/10min	ISO 1133

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	43	℃	ISO 75-2/Bf
Melting temperature	107	℃	ISO 11357-3
Vicat Softening Temp
A50	89	℃	ISO 306/A50

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	44.1	kJ/m²	ISO 180-1A
-30℃	9.0	kJ/m²	ISO 180-1A

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	40		ISO 868
tensile strength
23℃	10	MPa	ISO 527-2
Tensile strain
Fracture, 23 ℃	120	%	ISO 527-2
Tensile modulus
23℃	130	MPa	ISO 527-2

Notes
1. Typical properties: these are not to be construed as specifications.
2. Conditioning of test specimen: temp. 23 °C, relative humidity 50 %, 24 hours
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.