SABIC® LDPE PCG80

About
SABIC® LDPE PCG80 SABIC® LDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® LDPE PCG80 is an additive-free grade produced using SABIC’s proprietary high pressure Clean Tubular Reactor (CTR®) which typically ensures grades with high purity. It is typically used for semi-rigid containers obtained by Blow Fill Seal (BFS) process and medical films. Compliance to Regulations SABIC® LDPE PCG80 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI).&&SABIC® LDPE PCG80 Low density polyethylene for Healthcare Description SABIC® LDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® LDPE PCG80 is an additive free grade, typically designed for healthcare packaging and can typically be converted by Blow Fill Seal, Blow Molding and Blown Film to produce ampoules, small soft/flexible bottles and containers, but also bags and pouches. It has a low MFR and exhibits excellent draw down ability and mechanical properties in film applications. Compliance to Regulations SABIC® LDPE PCG80 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI). The product mentioned herein may not be used for medical healthcare devices or materials intended for temporary or permanent implementation in the human body.&&

About

SABIC® LDPE PCG80 SABIC® LDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® LDPE PCG80 is an additive-free grade produced using SABIC’s proprietary high pressure Clean Tubular Reactor (CTR®) which typically ensures grades with high purity. It is typically used for semi-rigid containers obtained by Blow Fill Seal (BFS) process and medical films. Compliance to Regulations SABIC® LDPE PCG80 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI).&&SABIC® LDPE PCG80 Low density polyethylene for Healthcare Description SABIC® LDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® LDPE PCG80 is an additive free grade, typically designed for healthcare packaging and can typically be converted by Blow Fill Seal, Blow Molding and Blown Film to produce ampoules, small soft/flexible bottles and containers, but also bags and pouches. It has a low MFR and exhibits excellent draw down ability and mechanical properties in film applications. Compliance to Regulations SABIC® LDPE PCG80 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI). The product mentioned herein may not be used for medical healthcare devices or materials intended for temporary or permanent implementation in the human body.&&

Product Description
Supplier	SABIC
Generic	LDPE
Material Status	Commercial: Active
Features	High purity,Low liquidity,Good dissection,Low density
Availabilitys	North America,Latin America,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.922	g/cm³	ISO 1183/A
Melt Flow Rate
190℃，2.16kg	0.33	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
friction coefficient	1.0		ASTM D1894

film	Nominal value	Unit	Test method
Tensile modulus			ISO 527-3
MD	190	MPa
TD	190	MPa
tensile strength			ISO 527-3
MD, yield	11.0	MPa
TD, yield	11.0	MPa
MD, fracture	27.0	MPa
TD, fracture	22.0	MPa
Tensile strain			ISO 527-3
MD, fracture	> 200	%
TD, fracture	> 500	%

IMPACT	Nominal value	Unit	Test method
Izod notched impact strength	300	J/cm	ASTM D4272

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	98.0	℃	ISO 306/A
Melting temperature
DSC	108	℃	DIN 53765

optical performance	Nominal value	Unit	Test method
gloss
45°	57		ASTM D2457
Haze	8.0	%	ASTM D1003A

Supplementary information	Nominal value	Unit	Test method
Blocking force	30	g	Internal Method
Re（blocking）	10	g	Internal Method
tear strength			ISO 6383-2
MD	35.0	kN/m
TD	40.0	kN/m

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.