SABIC® LDPE Powder 1965P9

About
SABIC® LDPE Powder 1965P9 is an additive free standard CTR® tubular grade for masterbatch with a typically low viscosity. This grade has a typically high filler acceptance. Application SABIC® LDPE Powder 1965P9 is a normal sized powder grade. Since the grade is supplied in powder form it is typically suited for pre mixing. The flow and dispersion of pigments and additives that tend towards blocking are typically improved by adding this grade. This product is not intended for and must not be used in any pharmaceutical/medical applications.&&

About

SABIC® LDPE Powder 1965P9 is an additive free standard CTR® tubular grade for masterbatch with a typically low viscosity. This grade has a typically high filler acceptance. Application SABIC® LDPE Powder 1965P9 is a normal sized powder grade. Since the grade is supplied in powder form it is typically suited for pre mixing. The flow and dispersion of pigments and additives that tend towards blocking are typically improved by adding this grade. This product is not intended for and must not be used in any pharmaceutical/medical applications.&&

Product Description
Supplier	SABIC
Generic	LDPE
Material Status	Commercial: Active
Features	Low Viscosity,Low density
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.922	g/cm³	ISO 1183
Melt Flow Rate
190℃，2.16kg	3.5	g/10min	ISO 1133

film	Nominal value	Unit
film thickness
test	38	µm
film thickness	0.020mm to 0.040 mm

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	90.0	℃	ISO 306/A
Melting temperature	110	℃	ISO 11357-3

optical performance	Nominal value	Unit	Test method
gloss
45°，38 µm	65		ASTM D2457
Haze
38 µm	2.5	%	ASTM D2457

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	43		ISO 868
tensile strength			ISO 527-2
yield	10.0	MPa
fracture	12.0	MPa
Tensile strain
fracture	600	%	ISO 527-2
friction coefficient			ISO 8295
With oneself – dynamic	< 0.11
With oneself – static	< 0.11

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	145 to 165	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.