About |
---|
SABIC® LDPE Powder 2008P5 is an additive free standard CTR® tubular grade with typically very low gel count and as such fine material for general purpose use. The grade is supplied in powder form. Application SABIC® LDPE Powder 2008P5 is a medium sized powder grade with medium viscosity for textile coating, carpet backing and compounding applications. It is also typically suited for masterbatch applications. This product is not intended for and must not be used in any pharmaceutical/medical applications.&& |
Product Description | |
---|---|
Supplier | SABIC |
Generic | LDPE |
Material Status | Commercial: Active |
Features | Low speed solidification point,Low density |
Availabilitys | Europe |
Technical Data | |||
---|---|---|---|
PHYSICAL | Nominal value | Unit | Test method |
Density | 0.920 | g/cm³ | ISO 1183 |
Apparent density | 0.35 | g/cm³ | ISO 60 |
Melt Flow Rate | |||
190℃,2.16kg | 7.5 | g/10min | ISO 1133 |
Particle size | |||
Powder | < 600 | µm | ASTM E1181 |
THERMAL | Nominal value | Unit | Test method |
---|---|---|---|
Vicat Softening Temp | 89.0 | ℃ | ISO 306/A |
Melting temperature | |||
DSC | 107 | ℃ | DIN 53765 |
Enthalpy Change | 125 | J/g | DIN 53765 |
Supplementary information | Nominal value | Unit | Test method |
---|---|---|---|
Dry Flow | 22.0 | sec | ISO 6186 |
Notes |
---|
1. Typical properties: these are not to be construed as specifications. |
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |