| About |
|---|
| 218WJ是一种丁烯线性低密度聚乙烯TNPP自由等级，适用于通用包装。 处理过程易于获得良好的拉伸性能，冲击强度和光学性能。 218WJ含有滑爽和防粘添加剂。 |
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | Linear low density polyethylene |
| Material Status | Commercial: Active |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 190℃，2.16kg | 2.0 | g/10min | ASTM D1238 |
| Density | 0.918 | g/cm³ | ASTM D1505 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of falling darts | 85 | g/µm | ASTM D1709 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Haze | 13 | % | ASTM D1003 |
| gloss | |||
| 60° | 80 | ASTM D2457 |
| Film properties | Nominal value | Unit | Test method |
|---|---|---|---|
| Fracture stress | |||
| MD | 35 | MPa | ASTM D882 |
| TD | 29 | MPa | ASTM D882 |
| Fracture strain | |||
| MD | 700 | % | ASTM D882 |
| TD | 750 | % | ASTM D882 |
| Tensile strain | |||
| yield | |||
| 1% positive modulus | |||
| MD | 220 | MPa | ASTM D882 |
| TD | 260 | MPa | ASTM D882 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |