| About |
|---|
| 高滑动，高光泽，薄膜级，包装容器，塑料袋 |
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | Linear low density polyethylene |
| Material Status | Commercial: Active |
| Features | Good Tensile Strength |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 190℃，2.16kg | 2 | g/10min | ASTM D1238 |
| Density | 0.918 | g/cm³ | ASTM D1505 |
| Impact strength of falling darts | 85 | g/µm | ASTM D1709 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Haze | 13 | % | ASTM D1003 |
| gloss | |||
| 60° | 80 | ASTM D2457 |
| Film properties | Nominal value | Unit | Test method |
|---|---|---|---|
| 1% secant modulus | |||
| MD | 220 | MPa | ASTM D882 |
| TD | 260 | MPa | ASTM D882 |
| tear strength | |||
| TD | 320 | g/µm | ASTM D1922 |
| MD | 130 | g/µm | ASTM D1922 |
| tensile strength | |||
| TD, fracture | 29 | MPa | ASTM D882 |
| MD, fracture | 35 | MPa | ASTM D882 |
| tensile strength | |||
| TD, yield | 10 | MPa | ASTM D882 |
| MD, yield | 12 | MPa | ASTM D882 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 95 | ℃ | ASTM D1525 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |