SABIC® LLDPE 318B

About
SABIC® LLDPE 318B SABIC® LLDPE 318B is a butene linear low density polyethylene resin typically designed for easy processing and specially formulated for optimum thermal stability at high temperatures used in cast film extrusion. Cast film produced from SABIC® LLDPE 318B exhibit very good optical properties, puncture resistance and tear strength. Application Cast Film: SABIC® LLDPE 318B resin is typcially used for hand and pallet stretch wrap. Masterbatch Compounding: SABIC® LLDPE 318B is a general grade, typically used for low filled or additive masterbatches in film and blow moulding applications (e.g. slip agents, anti fog agents, anti static agents, thermal stabilizers). This product is not intended for and must not be used in any pharmaceutical/medical applications.&&SABIC® LLDPE 318B Product Description 318B is Linear Low Density Polyethylene grade designed to provide easy processability and specially formulated for optimum thermal stability at high processing temperatures used during production of Cast films. Films produced using this resin gives excellent optical properties, good puncture resistance and tear strength. Typical Applications Cling film, Stretch films for manual and pellet wrap, melt embossed films and other general purpose applications.&&

About

SABIC® LLDPE 318B SABIC® LLDPE 318B is a butene linear low density polyethylene resin typically designed for easy processing and specially formulated for optimum thermal stability at high temperatures used in cast film extrusion. Cast film produced from SABIC® LLDPE 318B exhibit very good optical properties, puncture resistance and tear strength. Application Cast Film: SABIC® LLDPE 318B resin is typcially used for hand and pallet stretch wrap. Masterbatch Compounding: SABIC® LLDPE 318B is a general grade, typically used for low filled or additive masterbatches in film and blow moulding applications (e.g. slip agents, anti fog agents, anti static agents, thermal stabilizers). This product is not intended for and must not be used in any pharmaceutical/medical applications.&&SABIC® LLDPE 318B Product Description 318B is Linear Low Density Polyethylene grade designed to provide easy processability and specially formulated for optimum thermal stability at high processing temperatures used during production of Cast films. Films produced using this resin gives excellent optical properties, good puncture resistance and tear strength. Typical Applications Cling film, Stretch films for manual and pellet wrap, melt embossed films and other general purpose applications.&&

Product Description
Supplier	SABIC
Generic	Linear low density polyethylene
Material Status	Commercial: Active
Features	Excellent Processability,Low liquidity,Optical performance,Inoxidizability,Low density,Good tear strength,Butylene copolymer,Puncture Resistant,Heat Stabilized
Availabilitys	North America,Latin America,Europe
Process Methods	Film extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.918	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	2.8	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
tear strength	65	g	ASTM D1922
Tensile strain	470	%	ASTM D882
Drop hammer impact	75	g	ASTM D1709
Secant modulus	135	MPa	ASTM D882
Expansion intensity	13	MPa	ASTM D882

optical performance	Nominal value	Unit	Test method
gloss	90		ASTM D2457
Mistiness 30 μ M	5	%	ASTM D1003

IMPACT	Nominal value	Unit	Test method
Notched impact strength of cantilever beam

Process Conditions
Extrusion molding conditions	Nominal value	Unit	Test method
Zone 1 temperature	250	°C
Zone 5 temperature	300	°C

Notes
1. Typical properties: these are not to be construed as specifications.
2. Cast Film
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.