| About |
|---|
| SABIC® 920NT is an ethylene-butene copolymer designed for blown film application. Excellent mechanical strength, tear and puncture resistance. 920NT contains no slip and no antiblock. |
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | Linear low density polyethylene |
| Material Status | Commercial: Active |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.920 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.85 | g/10min | ASTM D1238 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile strength | |||
| MD: Yield | 10.0 | MPa | |
| TD: Yield | 10.0 | MPa | |
| MD: Fracture | 34.0 | MPa | |
| TD: Fracture | 26.0 | MPa | |
| Tensile strain | |||
| MD, fracture | 550 | % | |
| TD, fracture | 700 | % | |
| Drop hammer impact | 120 | g | ASTM D1709 |
| Elmandorf tear strength | |||
| MD | 35 | g | |
| TD | 140 | g |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | |||
| 45° | 60 | ASTM D2457 | |
| Haze | |||
| 30.0 µ m, blow molded film | 12 | % | ASTM D1003 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |