| About |
|---|
| SABIC® LLDPE M200024 SABIC® LLDPE M200024 is a linear low density polyethylene copolymer injection moulding grade with a narrow molecular weight distribution. It has been typcially designed to have good low temperature toughness, stress crack resistance (ESCR) and gloss. Typical applications. Injection Molding: SABIC® LLDPE M200024 is typcially used for injection moulding of large items where high flow and fast cycles are required such as for example housewares, trash cans, automotive parts, lids and large industrial containers. Masterbatch Compounding: SABIC® LLDPE M200024 is typically used for masterbatch applications like blow moulding, injection moulding and film extrusion. It can be used for for masterbatches with very high carbon black, titanium dioxide or pigment content. This product is not intended for and must not be used in any pharmaceutical/medical applications.&&SABIC® LLDPE M200024 Product Description M200024 is Linear Low Density Polyethylene grade with narrow molecular weight distribution suitable for injection molding applications. It has been designed to give good flow properties with low temperature toughness, stress crack resistance and high gloss. Typical Applications M200024 is recommended for housewares, trash cans, lids for large industrial containers, automotive parts etc.&& |
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | Linear low density polyethylene |
| Material Status | Commercial: Active |
| Features | Copolymer,Low density,High liquidity,High ESCR,Quick molding cycle,Low temperature toughness,Weight distribution,Good surface appearance |
| Availabilitys | North America,Europe,Latin America |
| Process Methods | Film extrusion,Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 924 | kg/m³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 20 | g/10min | ASTM D1238 |
| ESCR(Environmental Stress Cracking Resistance) | |||
| 100% non-ionic detergent 100% Igepal, molded, F50 | 24.0 | hr | ASTM D1693A |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Izod impact notched | |||
| 23 ℃, molded | 540 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Brittleness temperature | < -75.0 | ℃ | ASTM D746 |
| Vicat softening temperature | 94.0 | ℃ | ASTM D1525 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D, molded | 55 | ASTM D2240 | |
| Tensile modulus | |||
| 1% secant 1% elongation, molded | 315 | MPa | ASTM D638 |
| Tensile strength | |||
| Yield yld, molded | 12.0 | MPa | ASTM D638 |
| Break, molded | 8.50 | MPa | ASTM D638 |
| Tensile strain | |||
| Break, molded | 450 | % | ASTM D638 |
| Process Conditions | |||
|---|---|---|---|
| Injection | Nominal value | Unit | Test method |
| Material temperature | 193 to 232 | °C | |
| Mold temperature | 5.00 to 30.0 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Loading 1 (10 N) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |