| About |
|---|
| Product Description R50035 series resins are Linear Low Density Polyethylene grades designed to provide excellent stress crack resistance, mechanical properties with high rigidity, toughness, gloss and low warpage. R50035 Series includes following grades: R50035: Non UV stabilized, Pellets R50035E: UV stabilized, Pellets RG50035: Non UV stabilized, Powder Typical Applications Rotational molding of large industrial and agricultural tanks, trash containers and chemical shipping drums. They are also suitable for injection molding applications like caps, closures and housewares. RG50035 is suitable for producing compounds & masterbatches.&& |
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | Linear low density polyethylene |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Weather resistance is good,Low warping,Good flexibility,Good surface appearance,Solvent resistance,High ESCR |
| Availabilitys | North America,Latin America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.935 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 5.0 | g/10min | ASTM D1238 |
| ESCR(Environmental Stress Cracking Resistance) | |||
| 100% non-ionic detergent, injection molding, F50 | > 150 | hr | ASTM D1693B |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | < -75.0 | ℃ | ASTM D746 |
| Vicat Softening Temp | 114 | ℃ | ASTM D1525 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D, injection molding | 66 | ASTM D2240 | |
| Tensile modulus | |||
| 1% cut, injection molding | 420 | MPa | ASTM D638 |
| tensile strength | ASTM D638 | ||
| Yield, injection molding | 16.0 | MPa | ASTM D638 |
| Fracture, injection molding | 17.0 | MPa | ASTM D638 |
| Tensile strain | |||
| Fracture, injection molding | 590 | % | ASTM D638 |
| bending strength | |||
| injection molding | 13.0 | MPa | ASTM D790 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Processing (melt) temperature | 210 to 240 | °C | |
| Notes |
|---|
| 1. Grade: R50035E |
| 2. Grade: R50035 and R50035E |
| 3. Grade: RG50035 |
| 4. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |