SABIC® LLDPE R50035E

About
R50035E is a Linear Low Density Polyethylene grade with balanced density and viscosity designed to provide excellent stress cracking resistance, good mechanical properties with high rigidity, toughness, and low warpage. R50035E is an antioxdant and UV stabilized grade in pellet form.

Product Description
Supplier	SABIC
Generic	Linear low density polyethylene
Material Status	Commercial: Active
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.935	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	5.0	g/10min	ASTM D1238
ESCR(Environmental Stress Cracking Resistance)
100% non-ionic surfactant, injection molding, F50	> 150	hr	ASTM D1693A

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	< -75.0	℃	ASTM D746
Vicat Softening Temp	114	℃	ASTM D1525

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D, injection molding	66		ISO 868
Tensile modulus
1% cut, injection molding	420	MPa	ASTM D638
Tensile strength
Yield, injection molding	16.0	MPa
Fracture, injection molding	17.0	MPa
Tensile strain
Fracture, injection molding	590	%	ASTM D638
Bending modulus
injection molding	13.0	MPa	ISO 178

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.