| About |
|---|
| PC1000 resin is a medium-low flow (MFR = 10 at 300°C/1.2kg), heat stabilized, polycarbonate product designed for use in the custom compounding market. It does not contain UV stabilizer or mold release. It is available exclusively at www.sabicpc.com.&& |
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | Polycarbonate |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Moderate liquidity,Heat Stabilized,V-2 |
| Availabilitys | Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| tensile strength | |||
| Yield, Type I, 50 mm/min | 63 | MPa | ISO 527 |
| Yield, Type I, 50 mm/min | 63 | MPa | ASTM D638 |
| Tensile strain | |||
| Fracture, Type I, 50 mm/min | >70 | % | ISO 527 |
| Fracture, Type I, 50 mm/min | >70 | % | ASTM D638 |
| Yield, Type I, 50 mm/min | 6 | % | ISO 527 |
| Yield, Type I, 50 mm/min | 6 | % | ASTM D638 |
| bending strength | |||
| Yield, 2 mm/min | 90 | MPa | ISO 178 |
| Yield, 1.30 mm/min, 50 mm span | 90 | MPa | ASTM D790 |
| Bending modulus | |||
| 2 mm/mim | 2300 | MPa | ISO 178 |
| 1.3 mm/min，50mm跨距 | 2300 | MPa | ASTM D790 |
| Rockwell hardness | |||
| R-level | 120 | ISO 2039-2 | |
| R-level | 120 | ASTM D785 | |
| Tensile modulus | |||
| 5 mm/min | 2350 | MPa | ASTM D638 |
| 1 mm/min | 2350 | MPa | ISO 527 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Notched impact strength of cantilever beam | |||
| 23℃ | NB | J/m | ASTM D 4812 |
| Impact strength of cantilever beam notch | |||
| 23℃ | 800 | J/m | ASTM D256 |
| Total energy of instrument impact | |||
| 23℃ | 65 | J | ASTM D 3763 |
| Notched impact strength of cantilever beam | |||
| 23℃，80*10*3 | NB | kJ/m² | ISO 180/1U |
| Notched impact strength of cantilever beam | |||
| -30℃，80*10*3 | NB | kJ/m² | ISO 180/1U |
| Impact strength of cantilever beam notch | |||
| 23℃，80*10*3 | 70 | kJ/m² | ISO 180-1A |
| Impact strength of cantilever beam notch | |||
| -30℃，80*10*3 | 12 | kJ/m² | ISO 180-1A |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 143 | ℃ | ASTM D1525 |
| Hot deformation temperature | |||
| 1.8 MPa, 64 mm span | 127 | ℃ | ISO 75/Af |
| 0.45 MPa, 64 mm span | 138 | ℃ | ISO 75/Bf |
| 1.8 MPa, unannealed, 3.2 mm | 127 | ℃ | ASTM D648 |
| 0.45 MPa, unannealed, 3.2 mm | 138 | ℃ | ASTM D648 |
| Linear coefficient of thermal expansion | |||
| MD：23~80℃ | 7.E-05 | 1/℃ | ISO 11359-2 |
| MD：-40~95℃ | 7.E-05 | 1/℃ | ASTM E831 |
| Thermal conductivity coefficient | 0.2 | W/m/℃ | ASTM C 177 |
| Thermal conductivity coefficient | 0.2 | W/m/℃ | ISO 8302 |
| Ball pressure test | |||
| 125℃±2℃ | Passes | IEC 60695-10-2 | |
| Vicat Softening Temp | 143 | ℃ | ISO 306 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 1.2 | ASTM D792 | |
| Shrinkage rate | |||
| MD | 0.5 – 0.7 | % | Internal Method |
| Shrinkage rate | |||
| MD：3.2 mm | 0.5 – 0.7 | % | Internal Method |
| Melt Flow Rate | |||
| 300℃，1.20kg | 10 | g/10min | ASTM D1238 |
| Density | 1.2 | g/cm³ | ISO 1183 |
| Water absorption rate | |||
| Equilibrium, 23 ℃ | 0.35 | % | ASTM D570 |
| Saturation, 23 ℃ | 0.35 | % | ISO 62 |
| Melt Volume Rate | |||
| 265℃，5 kg | 9 | cm³/10min | ISO 1133 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Transmittance | |||
| 2.54 mm | 88 – 90 | % | ASTM D1003 |
| Haze | |||
| 2.54 mm | <0.8 | % | ASTM D1003 |
| Refractive index | 1.586 | ASTM D542 | |
| Refractive index | 1.586 | ISO 489 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | >1.E+15 | ohms·cm | ASTM D257 |
| Dielectric strength | |||
| 1.6 mm | 27 | kV/mm | IEC 60243-1 |
| 1.6 mm | 27 | kV/mm | ASTM D149 |
| Relative permittivity | |||
| 60 Hz | 3 | IEC 60250 | |
| 60 Hz | 3 | ASTM D150 | |
| 1 Hz | 3 | IEC 60250 | |
| 1 Hz | 3 | ASTM D150 | |
| Dissipation factor | |||
| 60 Hz | 0.001 | ASTM D150 | |
| 1 Hz | 0.01 | IEC 60250 | |
| 1 Hz | 0.01 | ASTM D150 | |
| Volume resistivity | >1.E+15 | ohms·cm | IEC 60093 |
| Dissipation factor | |||
| 60 Hz | 0.001 | IEC 60250 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| 94V-2 flame level assessment | 1.5 | mm | UL 94 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 120 | °C | |
| Drying time | 2.0 to 4.0 | hr | |
| Recommended maximum moisture content | 0.020 | % | |
| Hopper temperature | 60.0 to 80.0 | °C | |
| Barrel rear temperature | 260 to 280 | °C | |
| Barrel middle temperature | 270 to 290 | °C | |
| Barrel front temperature | 280 to 310 | °C | |
| Nozzle temperature | 270 to 290 | °C | |
| Processing (melt) temperature | 280 to 310 | °C | |
| Mold temperature | 80.0 to 110 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Tensile Bar |
| 3. 2.0 in/min |
| 4. Type I, 2.0 in/min |
| 5. 0.051 in/min |
| 6. 0.079 in/min |
| 7. Yield |
| 8. 80*10*3 |
| 9. 80*10*4 mm |
| 10. Rate B (120°C/h), Loading 2 (50 N) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |