| About |
|---|
| SABIC® PCG PET60 for healthcare applications is produced under controlled conditions resulting in high product quality, consistency and a high level of purity. PCG PET60 is a crystalline, low molecular weight thermoplastic polymer made by continues melt-phase polymerization process followed by solid-state polymerization. PCG PET60 is a specially formulated medical grade complying European pharma requirements. This grade exhibits easy flow ability which benefits thin walled injection molding process. |
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | PET |
| Material Status | Commercial: Active |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Apparent density | 0.83 to 0.85 | g/cm³ | ASTM D1895 |
| Color b | -2.50 to -0.500 | b-value | IRC 0051 |
| Color L | < 80.0 | Internal Method | |
| Dust Content | < 0.0100 | wt% | Internal Method |
| Intrinsic viscosity | 0.58 to 0.62 | dl/g | Internal Method |
| water content | |||
| balance | < 0.25 | % | Internal Method |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |