SABIC® PP 504PT

About
SABIC® PP 504PT is a low fluidity polypropylene homopolymer with consistent processability, easy orientation, low water carry over and good mechanical properties.

Product Description
Supplier	SABIC
Generic	PP homopolymerization
Material Status	Commercial: Active
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.905	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	3.2	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	100		ISO 2039-2
Tensile modulus	1700	MPa	ISO 527-2/1A
Tensile stress
yield	34.0	MPa
fracture	36.0	MPa
Tensile strain
fracture	440	%	ISO 527-2

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.