| About |
|---|
| SABIC® PP 510P is a fibre grade with an anti gas fading stabilisation package.This grade is suitable for e.g. wipes and industrial carpets. SABIC® PP 510P is suitable for spinning of coarse staple fibres, carpet fibres and yarns and geotextiles with moderate tenacity. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.&& |
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | PP homopolymerization |
| Material Status | Commercial: Active |
| Features | Wide molecular weight distribution,Solvent resistance,Homopolymer |
| Availabilitys | Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.905 | g/cm³ | ASTM D792, ISO 1183 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 12 | g/10min | ASTM D1238，ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | |||
| 1% secant | 1750 | MPa | ASTM D638 |
| — | 1700 | MPa | ISO 527-2/1A/1 |
| tensile strength | |||
| yield | 36.0 | MPa | ASTM D638 |
| yield | 35.0 | MPa | ISO 527-2/1A/50 |
| Tensile strain | |||
| yield | 11 | % | ASTM D638 |
| yield | 11 | % | ISO 527-2/1A/50 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 0.039 in/min |
| 3. 2.0 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |