SABIC® PP 511MNK40T

About
SABIC® PP 511MNK40T is a high fluidity polypropylene impact copolymer with high stiffness and medium impact strength. It contains nucleating u0026amp; antistatic agents.

Product Description
Supplier	SABIC
Generic	PP homopolymerization
Material Status	Commercial: Active
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.905	g/cm³	ISO 1183
Melt Flow Rate
230℃，2.16kg	29	g/10min	ISO 1133

IMPACT	Nominal value	Unit
Charpy Notched Impact Strength
-20℃	5.0	kJ/m²
23℃	9.0	kJ/m²

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	100	℃	ISO 75-2/B

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	95		ISO 2039-2
Tensile stress (yield)	25.0	MPa	ISO 527-2
Bending modulus
1% secant	1350	MPa	ISO 178

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.