SABIC® PP 519A

About
SABIC PP 519A is a polypropylene homopolymer resin specifically designed to enable optimised production speed of very fine filament titre resulting in an excellent balance of mechanical properties and softness.The rheological performance of SABIC PP519A is providing the potential to optimise production efficiency especially for fibre production characterised by consistent high speed and low non wovens weights at reduced temperatures. SABIC PP519A can also be used for continuous filament spinning like partially oriented yarn (POY). SABIC PP 519A has a very narrow molecular weight distribution. SABIC PP 519A is compatible with all existing spun bond/continuous filament machine technologies producing different non woven compositions. SABIC PP 519A has a special developed anti gas fading formulation to minimise discolouration of the fibres. Applications: SABIC PP 519A is typically used for the production of non wovens and fibres used in: Diapers, feminine care, apparel, crop/flower protection, concrete reinforcement, building, geo-textiles. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.&&

About

SABIC PP 519A is a polypropylene homopolymer resin specifically designed to enable optimised production speed of very fine filament titre resulting in an excellent balance of mechanical properties and softness.The rheological performance of SABIC PP519A is providing the potential to optimise production efficiency especially for fibre production characterised by consistent high speed and low non wovens weights at reduced temperatures. SABIC PP519A can also be used for continuous filament spinning like partially oriented yarn (POY). SABIC PP 519A has a very narrow molecular weight distribution. SABIC PP 519A is compatible with all existing spun bond/continuous filament machine technologies producing different non woven compositions. SABIC PP 519A has a special developed anti gas fading formulation to minimise discolouration of the fibres. Applications: SABIC PP 519A is typically used for the production of non wovens and fibres used in: Diapers, feminine care, apparel, crop/flower protection, concrete reinforcement, building, geo-textiles. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.&&

Product Description
Supplier	SABIC
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Weight distribution,Solvent resistance,Soft,Homopolymer
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.905	g/cm³	ASTM D792, ISO 1183
Melt Flow Rate
230℃，2.16kg	35	g/10min	ASTM D1238，ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus
1% secant	1550	MPa	ASTM D638
—	1500	MPa	ISO 527-2/1A/1
tensile strength
yield	31.0	MPa	ASTM D638
yield	30.0	MPa	ISO 527-2/1A/50
Tensile strain
yield	10	%	ASTM D638
yield	10	%	ISO 527-2/1A/50

Notes
1. Typical properties: these are not to be construed as specifications.
2. 0.039 in/min
3. 2.0 in/min
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.