SABIC® PP FPH50

About
SABIC® PP FPH50 is a grade developed for thin wall packaging as well as the caps & closures market. The grade is nucleated and is characterised by a high crystallisation temperature, excellent flow behaviour in combination with a high stiffness. SABIC® PP FPH50 allows for very cost efficient processing on the basis of easy mould filling, very short cycle times and robust processing behaviour in combination with pigments. It has a very good antistatic performance and shows easy demoulding. SABIC® PP FPH50 is typically used in thin wall packing applications both for food and non-food segments. In caps and closure, the grade could be used for wide mouth caps, amongst others. In media packaging, the grade offers opportunities for cycle time optimisation. The grade has excellent heat deflection temperature making it particularly suitable for hot fill applications. This product is not intended for and must not be used in any pharmaceutical/medical applications.&&

About

SABIC® PP FPH50 is a grade developed for thin wall packaging as well as the caps & closures market. The grade is nucleated and is characterised by a high crystallisation temperature, excellent flow behaviour in combination with a high stiffness. SABIC® PP FPH50 allows for very cost efficient processing on the basis of easy mould filling, very short cycle times and robust processing behaviour in combination with pigments. It has a very good antistatic performance and shows easy demoulding. SABIC® PP FPH50 is typically used in thin wall packing applications both for food and non-food segments. In caps and closure, the grade could be used for wide mouth caps, amongst others. In media packaging, the grade offers opportunities for cycle time optimisation. The grade has excellent heat deflection temperature making it particularly suitable for hot fill applications. This product is not intended for and must not be used in any pharmaceutical/medical applications.&&

Product Description
Supplier	SABIC
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Rigidity,Good liquidity,Nucleation,Quick molding cycle,Good stripping performance,Antistatic property,Homopolymer
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.905	g/cm³	ASTM D792, ISO 1183
Melt Flow Rate
230℃，2.16kg	50	g/10min	ASTM D1238，ISO 1133

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength
23℃	3.0	kJ/m²	ISO 179/1eA
Impact strength of cantilever beam notch
23℃	25	J/m	ASTM D256-A
23℃	2.5	kJ/m²	ISO 180-1A

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	110	℃	ASTM D648
0.45 MPa, unannealed	105	℃	ISO 75-2/Bf
1.8 MPa, unannealed	65.0	℃	ASTM D648
1.8 MPa, unannealed	60.0	℃	ISO 75-2/Af
Vicat Softening Temp
—	154	℃	ASTM D1525，ISO 306/A120 6 6
B120	103	℃	ASTM D1525, ISO 306/B120 7 7

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	71		ISO 868
Rockwell hardness
R-level	114		ASTM D785
Tensile modulus
1% secant	2100	MPa	ASTM D638
—	2050	MPa	ISO 527-2/1A/1
tensile strength
yield	40.0	MPa	ASTM D638
yield	39.0	MPa	ISO 527-2/1A/50
Tensile strain
yield	7.0	%	ASTM D638
yield	7.0	%	ISO 527-2/1A/50

Notes
1. Typical properties: these are not to be construed as specifications.
2. 0.039 in/min
3. 2.0 in/min
4. testbar 80104mm
5. Rate B (120°C/h), Loading 1 (10 N)
6. Rate B (120°C/h), Loading 2 (50 N)
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.