SABIC® PP PCGR02

About
SABIC® PP grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® PP PCGR02 is a polypropylene random copolymer primarily developed for a broad range of blow moulded and extrusion applications, such as monolayer and co-extruded films, for the healthcare industry. The grade exhibits a good contact transparency, good impact strength and an excellent processability. Typical applications: Bottles and containers made by extrusion / injection blow moulding&&

About

SABIC® PP grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® PP PCGR02 is a polypropylene random copolymer primarily developed for a broad range of blow moulded and extrusion applications, such as monolayer and co-extruded films, for the healthcare industry. The grade exhibits a good contact transparency, good impact strength and an excellent processability. Typical applications: Bottles and containers made by extrusion / injection blow moulding&&

Product Description
Supplier	SABIC
Generic	PP copolymer
Material Status	Commercial: Active
Features	Excellent Processability,Good Clarity,High purity,High impact resistance,Wide molecular weight distribution,Random copolymer
Availabilitys	Europe
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.905	g/cm³	ASTM D792, ISO 1183
Melt Flow Rate
230℃，2.16kg	1.7	g/10min	ASTM D1238，ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus
1% secant	950	MPa	ASTM D638
—	850	MPa	ISO 527-2/1A/1
tensile strength
yield	26.0	MPa	ASTM D638
yield	25.0	MPa	ISO 527-2/1A/50
Tensile strain
yield	13	%	ASTM D638
yield	12	%	ISO 527-2/1A/50

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength			ISO 179/1eA
0℃	3.0	kJ/m²
23℃	8.0	kJ/m²
Impact strength of cantilever beam notch
0℃	25	J/m	ASTM D256-A
23℃	200	J/m	ASTM D256-A
0℃	2.5	kJ/m²	ISO 180-1A
23℃	8.0	kJ/m²	ISO 180-1A

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.