SABIC® PPcompound G1120U

About
SABIC® PPcompound G1120U is a 20% short glass fiber reinforced and UV stabilized Polypropylene. The base material is a PP homopolymer optimized for good creep resistance. The glass fibres are hydrolytically stable and are chemically coupled to the PP matrix.

Product Description
Supplier	SABIC
Generic	PP not specified
Material Status	Commercial: Active
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.04	g/cm³	ISO 1183
Melt Flow Rate
230℃，2.16kg	3.0	g/10min	ISO 1133
Shrinkage rate
3.2 mm，24 hrs	0.69	%	Internal Method

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	4500	MPa	ISO 527-2/1A
Tensile stress (fracture)	80.0	MPa	ISO 527-2/1A
Tensile strain
fracture	3.7	%	ISO 527-2/1A
Bending modulus	4330	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength
23℃	11	kJ/m²	ISO 179/1eA
Impact strength of cantilever beam notch
23℃	8.0	kJ/m²	ISO 180-1A

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	145	℃	ISO 75-2/A
Linear coefficient of thermal expansion
MD：-30~30℃	5.0E-5	1/℃	ASTM D696
MD：23~80℃	5.4E-5	1/℃	ASTM D696
MD：-30~100℃	5.2E-5	1/℃	ISO 11359-2

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.