| About |
|---|
| SABIC® STAMAX 20YK270EE is a 20% long glass fiber reinforced low emission grade with improved impact and flow properties. The glass fibers are chemically coupled to the PP matrix, resulting in high stiffness and strength. IMDS ID: 577962470 |
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | PP not specified |
| Material Status | Commercial: Active |
| Availabilitys | Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.04 | g/cm³ | ISO 1183 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | |||
| 23℃ | 4500 | MPa | |
| 80℃ | 3250 | MPa | |
| Tensile stress | |||
| 23°C | 75.0 | MPa | |
| 80°C | 45.0 | MPa | |
| Tensile strain | |||
| Fracture, 23 ℃ | 2.5 | % | ISO 527-2/1A |
| Bending modulus | |||
| 23℃ | 4000 | MPa | |
| 80℃ | 3000 | MPa | |
| Bending stress | |||
| 23°C | 115 | MPa | |
| 80°C | 60.0 | MPa |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| -30℃ | 18 | kJ/m² | |
| 23℃ | 19 | kJ/m² | |
| Charpy Unnotch Impact strength | |||
| -30℃ | 55 | kJ/m² | |
| 23℃ | 45 | kJ/m² |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 156 | ℃ | ISO 75-2/A |
| Linear coefficient of thermal expansion | |||
| MD：-30~100℃ | 5.0E-5 | 1/℃ | ISO 11359-2 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |