| About |
|---|
| SABIC® STAMAX 60YK270 is a 60% long glass fiber reinforced polypropylene concentrate, specially developed for dilution with SABIC®PP copolymer. The glass fibers are chemically couplied to the PP matrix, resulting in high stiffness and strength. The IMDS is 73727725.&& |
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | PP not specified |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Chemical coupling |
| Availabilitys | North America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.48 | g/cm³ | ISO 1183 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Glass fiber content | 60 | % | ISO 3451 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 80 to 100 | °C | |
| Drying time | 2.0 | hr | |
| Barrel rear temperature | 230 to 290 | °C | |
| Barrel middle temperature | 225 to 285 | °C | |
| Barrel front temperature | 220 to 280 | °C | |
| Nozzle temperature | 220 to 280 | °C | |
| Processing (melt) temperature | 220 to 280 | °C | |
| Mold temperature | 20 to 80 | °C | |
| Back pressure | 0.00 to 0.500 | MPa | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |