| About |
|---|
| SABIC® FORTIFY™ C1070D is an ethylene octene copolymer produced by solution polymerization using metallocene catalyst. This product is available as free flowing pellets. SABIC® FORTIFY™ C1070D is designed as a low density and high performance copolymer modifier to provide superior impact properties and flow characteristics. Typical applications are impact modifier in thermoplastic olefin compounds, footwear midsoles and wire and cable extrusion. Please take notice of specific storage and handling conditions. This product is not intended for and must not be used in any pharmaceutical/medical applications.&& |
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | Polyolefin Elastomer |
| Material Status | Commercial: Active |
| Features | High impact resistance,Good liquidity,Low density,Octene copolymer,Copolymer |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.868 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 1.0 | g/10min | ASTM D1238 |
| Mooney viscosity | |||
| ML 1+4，121℃ | 22 | MU | ASTM D1646 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tear strength | 39.2 | kN/m | ASTM D624 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Glass transition temperature | -52.0 | ℃ | Internal Method |
| Melting temperature | 62.0 | ℃ | Internal Method |
| Supplementary information | Nominal value | Unit | Test method |
|---|
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 1 second | 71 | ||
| Shore D, 1 second | 21 | ||
| Tensile modulus | |||
| 100% secant | 2.90 | MPa | ASTM D638 |
| tensile strength | |||
| fracture | 9.30 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 850 | % | ASTM D638 |
| Bending modulus | |||
| 1% secant | 13.2 | MPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Die C |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |