| About |
|---|
| FORTIFY™ C1085是一种乙烯辛烯共聚物，该产品为自由流动的颗粒，作为一个低密度和高性能共聚物改性剂，提供优越的冲击性能和流动特性。典型的应用是热塑性烯烃、鞋垫和电线和电缆挤压中的冲击改性剂。本产品不适用，不得用于任何医药/医疗用途。 |
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | Polyolefin Elastomer |
| Material Status | Commercial: Active |
| Features | High impact resistance,Good liquidity |
| Availabilitys | Africa & Middle East ,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.885 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 1.0 | g/10min | ASTM D1238 |
| Mooney viscosity | |||
| ML 1+4，250°F | 21 | MU | ASTM D1646 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tear strength | 58.8 | kN/m | ASTM D624 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Glass transition temperature | -47 | ℃ | Internal Method |
| Melting temperature | 74 | ℃ | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 1 second | 81 | ASTM D2240 | |
| Shore D, 1 second | 29 | ASTM D2240 | |
| Tensile modulus | |||
| 100% secant | 4.6 | MPa | ASTM D638 |
| tensile strength | |||
| fracture | 16.7 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 700 | % | ASTM D638 |
| Bending modulus | |||
| 1% secant | 29.4 | MPa | ASTM D790 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |