| About |
|---|
| FORTIFY™C13060是使用茂金属催化剂通过溶液聚合生产的乙烯辛烯共聚物。 该产品可作为自由流动的颗粒。 SABIC®FORTIFY™C13060设计为低密度和高性能共聚物改性剂，可提供出众的冲击性能和流动特性。冲击改性剂用于热塑性烯烃化合物，鞋类中底和电线电缆挤出。 |
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | Polyolefin Elastomer |
| Material Status | Commercial: Active |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.863 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 13 | g/10min | ASTM D1238 |
| 190℃，2.16kg | 13 | g/10min | ASTM D1238 |
| 230℃，2.16kg | 27 | g/10min | ASTM D1238 |
| Mooney viscosity | |||
| ML 1+4，121℃ | 3 | MU | ASTM D1646 |
| ML 1+4，121℃ | 3 | MU | ASTM D1646 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | ASTM D2240 | ||
| Shore hardness | |||
| Shaw’s A | 63 | ASTM D2240 | |
| Shaw’s D | 16 | ASTM D2240 | |
| tear strength | 25.5 | kN/m | ASTM D624 |
| Film properties | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile property | |||
| Breaking strength | 3.1 | MPa | ASTM D638 |
| Tensile strain | >1000 | % | ASTM D638 |
| fracture | > 1000 | % | ASTM D638 |
| 100% modulus | 1.8 | MPa | ASTM D638 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting peak temperature | 42 | ℃ | SABIC method |
| Glass transition temperature | -56 | ℃ | SABIC method |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |