| About |
|---|
| SABIC®SUPEER™7318BE是茂金属乙烯 – 己烯共聚物。 它具有良好的加工性能，在各种通用和高性能流延薄膜应用中表现良好。 用这种等级生产的薄膜具有良好的冲击强度，抗穿刺性，密封性和光学性能。 SABIC®SUPEER™7318BE通常用于拉伸和层压薄膜。 本产品不适用于任何制药/医疗应用，也不得用于任何药品/医疗应用。 |
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | mPE |
| Material Status | Commercial: Active |
| Features | High impact resistance,Good Tensile Strength,Puncture Resistant |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 190℃，2.16kg | 3 | g/10min | ASTM D1238 |
| Density | 0.918 | g/cm³ | ASTM D792 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Drop hammer impact | |||
| F50 | 24 | g | ASTM D1709 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tear strength | |||
| TD | 18 | g/µm | ASTM D1922 |
| MD | 15 | g/µm | ASTM D1922 |
| Tensile strain | |||
| MD, fracture | 650 | % | ASTM D882 |
| TD | 650 | % | ASTM D882 |
| tensile strength | |||
| MD, fracture | 42 | MPa | ASTM D882 |
| TD, fracture | 40 | MPa | ASTM D882 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Haze | 20 | % | ASTM D1003 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melt Temperature | 122 | ℃ | ASTM D3418 |
| Vicat Softening Temp | 103 | ℃ | ISO 306 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |