Safron® C765-15NA

About
Safron® C765-15NA Polypropylene Resin is a high performance impact copolymer developed for injection moulding applications. C765-15NA Polypropylene Resin has an improved balance of mechanical properties featuring outstanding stiffness and high impact strength which is maintained even at low temperatures. Safron® C765-15NA Polypropylene Resin offers an improvement in stiffness over conventional impact copolymers with comparable flow and toughness. It also contains an antistatic additive. Typical Applications Crates and boxes Household appliances Packaging applications Compounding Toys Pails Thin walled containers&&

About

Safron® C765-15NA Polypropylene Resin is a high performance impact copolymer developed for injection moulding applications. C765-15NA Polypropylene Resin has an improved balance of mechanical properties featuring outstanding stiffness and high impact strength which is maintained even at low temperatures. Safron® C765-15NA Polypropylene Resin offers an improvement in stiffness over conventional impact copolymers with comparable flow and toughness. It also contains an antistatic additive. Typical Applications Crates and boxes Household appliances Packaging applications Compounding Toys Pails Thin walled containers&&

Product Description
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Rigidity,Good flexibility,High impact resistance,Good liquidity,Food contact compliance,Antistatic property,low-temperature impact resistance,Impact copolymer,Heat Stabilized
Availabilitys	Africa & Middle East
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ISO 1183
Melt Flow Rate
230℃，2.16kg	15	g/10min	ISO 1133

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength			ISO 179
-20 ℃, injection molding	6.5	kJ/m²	ISO 179
23 ℃, injection molding	12	kJ/m²	ISO 179

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	90.0	℃	ISO 75-2/B
Vicat Softening Temp	150	℃	ISO 306/A

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D, injection molding	66		ISO 868
tensile strength
Yield, injection molding	26.0	MPa	ISO 527-2
Tensile strain
Yield, injection molding	10	%	ISO 527-2
Bending modulus
injection molding	1200	MPa	ISO 178

Process Conditions
injection	Nominal value	Unit	Test method
Barrel rear temperature	190	°C
Barrel middle temperature	220 to 270	°C
Barrel front temperature	260	°C
Nozzle temperature	240	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.