| About |
|---|
| The SAN 140 is a styrene-acrylonitrile co-polymer with an excellent chemical resistance and very high flow, suitable for blending purposes. No additives such as colourants, internal or external lubricants are added to the SAN 140. Applications: ABS-blending&& |
| Product Description | |
|---|---|
| Supplier | Trinseo |
| Generic | SAN |
| Material Status | Commercial: Active |
| Features | High liquidity,Solvent resistance,HB |
| Availabilitys | Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.08 | g/cm³ | ISO 1183 |
| Melt Flow Rate | ISO 1133 | ||
| 220℃，10.0kg | 100 | g/10min | |
| 230℃，3.80kg | 40 | g/10min | |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 100 | ℃ | ISO 306/A120 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 1.50 mm | HB | UL 94 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. This rating not intended to reflect hazards presented by this or any other material under actual fire conditions. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |