| About |
|---|
| The pellet product is colourless and in the shape of a cylinder with good transparency, high gloss. It is resistant to breakage, high temperature, with high rigidity and moisture inhibition. It is odorless. Scope of Application: Mainly for production of fodd grade small injection moulding parts and thin wall packaging products.&& |
| Product Description | |
|---|---|
| Supplier | SINOPEC Shanghai |
| Generic | PP copolymer |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Good Clarity,Good surface appearance,Food contact compliance,High Heat Resistance,Low odor,Moisture resistance,Random copolymer |
| Availabilitys | Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 230℃，2.16kg | 5.5 to 11 | g/10min | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | > 26.5 | MPa | ASTM D638 |
| Bending modulus | > 950 | MPa | Internal Method |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Notched impact strength of cantilever beam | |||
| 23℃ | > 35 | J/m | Internal Method |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Yellowness index | < 1.0 | YI | Internal Method |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |