| About |
|---|
| A soft, black, UV resistant thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. This material has controlled rheology for robotic or specialty extrusion applications. This grade of Santoprene TPV is shear-dependent and can be processed on conventional thermoplastics equipment for extrusion. It is polyolefin based and recyclable within the manufacturing stream.&& |
| Product Description | |
|---|---|
| Supplier | Celanese |
| Material Status | Commercial: Active |
| Features | Good melt strength,Ozone resistance,Renewable resources,Weather resistance is good |
| Availabilitys | Latin America,Europe,Africa & Middle East ,North America,Asia Pacific |
| Process Methods | Profile extrusion,Extrusion |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| Tensile Strength | |||
| 100% elongation, vertical perpendicular | 1.7 | MPa | ISO 527-2 |
| Vertical vertical | 4 | MPa | ISO 527-2 |
| Elongation at Break | 450 | % | ISO 527-1,2 |
| Shore hardness | 56 | Shore A | ISO 868 |
| 23℃，24 h | 23 | % | ISO 815 |
| 70 ℃，24 h | 41 | % | ISO 815 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 910 | kg/m³ | ISO 1183 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Brittle Temperature | -61 | ℃ | ASTM D746 |
| Low temperature brittleness | -61 | ℃ | ISO 812 |
| Aging property | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness change after aging | -1 | ISO 868 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Type 1 |
| 3. Type A |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |