| About |
|---|
| A hard, colorable, flame retardant thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. This material has good fluid resistance and contains non-ether brominated flame retardants. It does not contain metal deactivators. This grade of Santoprene TPV is shear-dependent and can be processed on conventional thermoplastics equipment for injection molding, extrusion, blow molding, thermoforming or vacuum forming. It is polyolefin based and recyclable within the manufacturing stream.&& |
| Product Description | |
|---|---|
| Supplier | Celanese |
| Material Status | Commercial: Active |
| Features | Solvent resistance,Good Dimensional Stability,Flame Characteristics,Renewable resources,Fatigue resistance,V-2,Good heat aging resistance,Ozone resistance,Good coloring,Good Electrical Properties,Low temperature toughness |
| Availabilitys | Europe,Africa & Middle East ,Latin America,Asia Pacific,North America |
| Process Methods | Thermo forming,Multiple injection molding,Extrusion,Profile extrusion,Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.15 | g/cm³ | ASTM D792 |
| Density | 1.15 | g/cm³ | ISO 1183 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| TD, fracture, 23 ℃ | 10.6 | MPa | ISO 37 |
| TD, fracture, 23 ℃ | 10.6 | MPa | ASTM D412 |
| TD, 100% strain, 23 ℃ | 4.50 | MPa | ASTM D412 |
| TD, 100% strain, 23 ℃ | 4.50 | MPa | ISO 37 |
| Tensile strain | |||
| TD, fracture, 23 ℃ | 540 | % | ISO 37 |
| TD, fracture, 23 ℃ | 540 | % | ASTM D412 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 15 seconds, 23 ℃ | 89 | ISO 868 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 0.75 mm | V-2 | UL 94 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |