| About |
|---|
| SARANEX™ 14P Coextruded Barrier Film is a multilayer film designed for limited use in protective garments. It contains Dow SARAN™ barrier resin, and is available at 2.0 mil, in widths from 18 to 45 or 54 to 90 inches. General Characteristics: Yield: 13,600 in²/lb (19.3 m²/kg) Thickness: 2 mil (51 µm) Width: 18 – 45 or 54 – 90 in . (458 – 1143 or 1372 – 2286 mm) Color: Natural Treated outside ( TO), untreated (TX) or treated inside ( TI).&& |
| Product Description | |
|---|---|
| Supplier | DOW |
| Generic | PVDC |
| Material Status | Commercial: Active |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| film | Nominal value | Unit | Test method |
| film thickness | |||
| test | 51 | µm | ASTM D374 |
| film thickness | 2.0 mil (51 µ | ||
| Secant modulus | ASTM D882 | ||
| 2% secant, MD: 51 µ m | 269 | MPa | |
| 2% secant, TD: 51 µ m | 276 | MPa | |
| tensile strength | ASTM D882 | ||
| MD, fracture, 51 µ m | 24.1 | MPa | |
| TD, fracture, 51 µ m | 22.1 | MPa | |
| Tensile strain | ASTM D882 | ||
| MD, fracture, 51 µ m | 440 | % | |
| TD, fracture, 51 µ m | 520 | % | |
| Oxygen transfer rate | |||
| 23℃，50% RH，51 µm | 5.4 | cm³/m²/24 hr | ASTM D3985 |
| Water vapor transmittance | |||
| 38℃，90% RH，51 µm | 4.5 | g/m²/24 hr | ASTM F1249 |
| Heat sealing strength | Internal Method | ||
| MD：177℃ | 680 | N/m | |
| TD：177℃ | 630 | N/m | |
| dosage | |||
| 50.8 µm | 19.3 | m²/kg | ASTM D4321 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |