| About |
|---|
| Sarlink TPE EE-2270N-01 is a general purpose thermoplastic elastomer designed for automotive exterior applications including trim and weatherstripping. Sarlink TPE 2270N-01 is a medium hardness, low density UV stabilized grade suitable for extrusion.&& |
| Product Description | |
|---|---|
| Supplier | Teknor Apex |
| Generic | TPE |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Low liquidity,Smoothness,Ultraviolet absorption,Lubricating,Low density |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| tensile strength | ISO 37 | ||
| TD, 100% strain | 2.11 | MPa | ISO 37 |
| MD, 100% strain | 2.78 | MPa | ISO 37 |
| fracture | 10.6 | MPa | ISO 37 |
| MD, fracture | 7.7 | MPa | ISO 37 |
| Tensile strain | ISO 37 | ||
| fracture | 770 | % | ISO 37 |
| Flow rate, fracture | 610 | % | ISO 37 |
| tear strength | ISO 34-1 | ||
| TD | 35 | kN/m | ISO 34-1 |
| MD | 36 | kN/m | ISO 34-1 |
| Compression deformation | ISO 815 | ||
| 23℃，22 hr | 24 | % | ISO 815 |
| 70℃，22 hr | 52 | % | ISO 815 |
| 90℃，70 hr | 65 | % | ISO 815 |
| 125℃，70 hr | 81 | % | ISO 815 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | ISO 868 | ||
| Shore A, 1 second, injection molding | 72 | ISO 868 | |
| Shore A, 5 seconds, injection molding | 68 | ISO 868 | |
| Shore A, 15 seconds, injection molding | 67 | ISO 868 |
| Aging performance | Nominal value | Unit | Test method |
|---|---|---|---|
| The rate of change in tensile strength in air | ISO 188 | ||
| TD：110℃，1008 hr | 3.7 | % | ISO 188 |
| MD：110℃，1008 hr | -0.40 | % | ISO 188 |
| TD: 100% strain at 110 ℃, 1008 hr | 13 | % | ISO 188 |
| MD: 100% strain at 110 ℃, 1008 hr | 7.6 | % | ISO 188 |
| TD：125℃，168 hr | -0.90 | % | ISO 188 |
| MD：125℃，168 hr | -3.9 | % | ISO 188 |
| TD: 100% strain 125 ℃, 168 hr | 11 | % | ISO 188 |
| MD: 100% strain 125 ℃, 168 hr | 9.4 | % | ISO 188 |
| Changes in tensile stress during fracture in air | ISO 188 | ||
| TD：110℃，1008 hr | -1.6 | % | ISO 188 |
| Flow rate: 110 ℃, 1008 hr | 0.0 | % | ISO 188 |
| TD：125℃，168 hr | -3.9 | % | ISO 188 |
| Flow rate: 125 ℃, 168 hr | -3.3 | % | ISO 188 |
| The rate of change of Shore hardness in air | ISO 188 | ||
| Shore A, 110 ℃, 1008 hr | 4.9 | ISO 188 | |
| Shore A, 110 ℃, 1008 hr | 6.1 | ISO 188 | |
| Shore A, 110 ℃, 1008 hr | 6.4 | ISO 188 | |
| Shaw A, 125 ℃, 168 hr | 3.3 | ISO 188 | |
| Shaw A, 125 ℃, 168 hr | 4.0 | ISO 188 | |
| Shaw A, 125 ℃, 168 hr | 4.4 | ISO 188 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 0.920 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 200℃，5.0kg | 5.0 | g/10min | ASTM D1238 |
| Apparent viscosity of melt | |||
| 200℃，206 sec^-1 | 244 | Pa·s | ASTM D3835 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Extrusion | Nominal value | Unit | Test method |
| Barrel rear temperature | 199 to 210 | °C | |
| Barrel middle temperature | 204 to 216 | °C | |
| Barrel front temperature | 210 to 221 | °C | |
| Nozzle temperature | 216 to 227 | °C | |
| Processing (melt) temperature | 216 to 227 | °C | |
| Mold temperature | 35 to 66 | °C | |
| Injection pressure | 1.38 to 6.89 | MPa | |
| Injection speed | Fast | ||
| Back pressure | 0.172 to 0.862 | MPa | |
| Screw speed | 50 to 120 | rpm | |
| Cushion | 3.81 to 25.4 | mm | |
| Barrel 1 zone temperature | 193 to 204 | °C | |
| Barrel 2 zone temperature | 199 to 210 | °C | |
| Barrel 3 zone temperature | 204 to 216 | °C | |
| Barrel 5 zone temperature | 210 to 221 | °C | |
| Nozzle temperature | 216 to 227 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Type 1, 20 in/min |
| 3. Method Ba, Angle (Unnicked), 20 in/min |
| 4. Type A |
| 5. Type 1 |
| 6. 1 sec |
| 7. 5 sec |
| 8. 15 sec |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |