| About |
|---|
| The Sarlink ME-2600 Series is a super high flow high performance thermoplastic elastomer series, available in BLK, designed for automotive exterior molded applications, including window encapsulation. Sarlink ME-2675B is a medium hardness, low density, resilient, UV stabilized, super high flow injection molding grade delivering excellent aesthetics with good adhesion to glass with primer.&& |
| Product Description | |
|---|---|
| Supplier | Teknor Apex |
| Generic | TPE |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Excellent Processability,Good surface appearance,High liquidity,Good bond,Elastic,Low density,Solvent resistance |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| elastic body | Nominal value | Unit | Test method |
| tensile strength | ISO 37 | ||
| fracture | 10.5 | MPa | ISO 37 |
| MD, fracture | 9.20 | MPa | ISO 37 |
| Tensile strain | ISO 37 | ||
| fracture | 790 | % | ISO 37 |
| Flow rate, fracture | 730 | % | ISO 37 |
| tear strength | ISO 34-1 | ||
| TD | 33 | kN/m | ISO 34-1 |
| MD | 33 | kN/m | ISO 34-1 |
| Compression deformation | ISO 815 | ||
| 23℃，22 hr | 23 | % | ISO 815 |
| 70℃，22 hr | 45 | % | ISO 815 |
| 90℃，70 hr | 69 | % | ISO 815 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | ISO 868 | ||
| Shore A, 1 second, injection molding | 77 | ISO 868 | |
| Shore A, 5 seconds, injection molding | 74 | ISO 868 | |
| Shore A, 15 seconds, injection molding | 73 | ISO 868 |
| Aging performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Change rate of tensile strength in air – TD | ISO 188 | ||
| 110℃，1008 hr | -2.0 | % | ISO 188 |
| 125℃，168 hr | -7.0 | % | ISO 188 |
| Changes in tensile stress when fractured in air – TD | ISO 188 | ||
| 110℃，1008 hr | 0.50 | % | ISO 188 |
| 125℃，168 hr | -1.6 | % | ISO 188 |
| The rate of change of Shore hardness in air | ISO 188 | ||
| Shore A, 110 ℃, 1008 hr | 1.9 | ISO 188 | |
| Shaw A, 125 ℃, 168 hr | 2.2 | ISO 188 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 0.938 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 18 | g/10min | ASTM D1238 |
| Apparent viscosity of melt | |||
| 200℃，206 sec^-1 | 137 | Pa·s | ASTM D3835 |
| Special value | Nominal value | Unit | Test method |
|---|---|---|---|
| TD, 100% strain | 2.55 | MPa | ISO 37 |
| MD, 100% strain | 2.79 | MPa | ISO 37 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Barrel rear temperature | 170 to 190 | °C | |
| Barrel middle temperature | 175 to 195 | °C | |
| Barrel front temperature | 180 to 205 | °C | |
| Nozzle temperature | 180 to 205 | °C | |
| Processing (melt) temperature | 180 to 205 | °C | |
| Mold temperature | 15 to 40 | °C | |
| Injection pressure | 1.38 to 6.89 | MPa | |
| Injection speed | Fast | ||
| Back pressure | 0.172 to 0.862 | MPa | |
| Screw speed | 50 to 120 | rpm | |
| Cushion | 3.81 to 25.4 | mm | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |