Sarlink® TPE OM-2368N

About
Sarlink TPE OM series are high performance specialty thermoplastic elastomers designed for automotive applications requiring excellent bondability to engineered resin substrates. Sarlink TPE OM-2368 is a medium hardness, low density, opaque, UV stabilized grade that exhibits excellent adhesion to nylon (polyamide).&&

Product Description
Supplier	Teknor Apex
Generic	TPE
Material Status	Commercial: Active
Features	Weather resistance is good,Excellent Processability,Good bond,Low density,Solvent resistance,Soft,Good coloring,Agglomerability
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.918	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	8	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	70		ASTM D2240
Shaw A5 sec	68		ASTM D2240
tensile strength	6	MPa	ASTM D412
Tensile strain
fracture	400	%	ASTM D412

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	65	°C
Drying time	2-4	Hr
Injection temperature
Rear barrel temperature	205-230	°C
Central temperature of the barrel	210-230	°C
Barrel front temperature	215-240	°C
Die temperature	220-245	°C
Mold temperature	25-60	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.