| About |
|---|
| Sarlink TPV 3790 is a high performance thermoplastic vulcanizate used in automotive and industrial applications. Sarlink TPV 3790 is a high hardness, UV resistant, RoHS compliant grade exhibiting superior compression set and chemical resistance. This grade can be processed by injection molding, blow molding, and extrusion.&& |
| Product Description | |
|---|---|
| Supplier | Teknor Apex |
| Generic | TPV |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Excellent Processability,Good Hardness,Good bond,Heat Resistance, Good,Good coloring |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.950 | g/cm³ | ISO 1183 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 5 seconds, injection molding | 94 | ||
| Shore D, 5 seconds, injection molding | 32 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| TD, fracture | 14.0 | MPa | ISO 37 |
| TD, 100% strain | 7.00 | MPa | ISO 37 |
| Tensile strain | |||
| TD, fracture | 750 | % | ISO 37 |
| Compression deformation | |||
| 70℃，22 hr | 62 | % | ISO 815 |
| Legal Statement | Nominal value | Unit | Test method |
|---|---|---|---|
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Squeeze description | Nominal value | Unit | Test method |
| Extrusion | Nominal value | Unit | Test method |
| Barrel rear temperature | 180 to 215 | °C | |
| Barrel middle temperature | 180 to 215 | °C | |
| Barrel front temperature | 180 to 215 | °C | |
| Nozzle temperature | 187 to 220 | °C | |
| Processing (melt) temperature | 185 to 220 | °C | |
| Mold temperature | 10 to 55 | °C | |
| Back pressure | 0.100 to 1.00 | MPa | |
| Screw speed | 100 to 200 | rpm | |
| Barrel 1 zone temperature | 180 to 200 | °C | |
| Barrel 2 zone temperature | 180 to 205 | °C | |
| Barrel 3 zone temperature | 187 to 210 | °C | |
| Barrel 4 zone temperature | 187 to 210 | °C | |
| Melt temperature | 195 to 215 | °C | |
| Nozzle temperature | 195 to 215 | °C | |
| Traction roller | 20 to 50 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Type 2 |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |