| About |
|---|
| SARLINK® TPV 4100 series are engineered materials designed primarily for demanding automotive and industrial applications. Available in both black and natural, SARLINK® 4149D is a low density, high hardness thermoplastic vulcanizate that exhibits exceptional tensile strength, superior compression set, chemical resistance and high temperature performance. This grade can be processed by injection molding, blow molding and extrusion for applications such as seals, gaskets, chemical resistant hose and tube, boots and bellows.&& |
| Product Description | |
|---|---|
| Supplier | Teknor Apex |
| Generic | TPV |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good heat aging resistance,Good surface appearance,High elastic,Ethanol tolerance,Good Hardness,Good bond,Fatigue resistance,Elastic,Low density,Heat Resistance, Good,Solvent resistance,Higher melt stability |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.940 | g/cm³ | ASTM D792 |
| viscosity | 458 | Pa·s | ASTM D3835 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shaw A5sec, extruded sample | 47 | ASTM D2240 | |
| Shaw A5sec, injection molded sample | 51 | ASTM D2240 | |
| tensile strength | 18.40 | MPa | ASTM D412 |
| tensile strength | 22.00 | MPa | ASTM D412 |
| 100% modulus | 13.5 | MPa | ASTM D412 |
| 100% modulus | 15.6 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 683 | % | ASTM D624 |
| tear strength | 141 | KN/m | ASTM D624 |
| Compression deformation | 59 | % | ASTM D395 |
| Compression deformation | 85 | % | ASTM D395 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Extrusion molding conditions | Nominal value | Unit | Test method |
| Drying temperature | 82.2 | °C | |
| Drying time | 3 | Hr | |
| Injection temperature | |||
| Rear barrel temperature | 177-216 | °C | |
| Central temperature of the barrel | 177-216 | °C | |
| Barrel front temperature | 182-221 | °C | |
| Die temperature | 188-221 | °C | |
| Mold temperature | 10.0-65.6 | °C | |
| Drying temperature | 82.2 | °C | |
| Drying time | 3 | Hr | |
| Zone 1 temperature | 182-204 | °C | |
| Zone 3 temperature | 188-210 | °C | |
| Zone 5 temperature | 188-210 | °C | |
| Die temperature | 193-216 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Method Ba, Angle (Unnicked) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |