| About |
|---|
| SARLINK® TPV 11000 series are engineered low friction slip coating materials designed primarily for demanding automotive and industrial applications. SARLINK® TPV X11044DB is a high hardness, low density grade with good UV resistance and superior abrasion resistance and can be co-extruded with TPE-S, TPE-V, and EPDM.&& |
| Product Description | |
|---|---|
| Supplier | Teknor Apex |
| Generic | TPV |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Excellent Processability,Good Dimensional Stability,Good Hardness,Low coefficient of friction,High Heat Resistance,Good bond,Low density,Solvent resistance,Agglomerability |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| Shore hardness | |||
| Shore D, 5 seconds, injection molding | 40 | ISO 868 | |
| Shore D, 5 seconds, injection molding | 40 | ASTM D2240 | |
| Bending modulus | |||
| — | 173 | MPa | ISO 178 |
| — | 173 | MPa | ASTM D790 |
| friction coefficient | |||
| Glass – Dynamic | 0.25 | ASTM D1894 | |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| TD, fracture | 11.0 | MPa | ISO 37 |
| TD, fracture | 11.0 | MPa | ASTM D412 |
| Tensile strain | |||
| TD, fracture | 550 | % | ISO 37 |
| TD, fracture | 550 | % | ASTM D412 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | |||
| — | 0.960 | g/cm³ | ISO 1183 |
| — | 0.960 | g/cm³ | ASTM D792 |
| Apparent viscosity of melt | |||
| 200℃，206 sec^-1 | 312 | Pa·s | ISO 11443 |
| 200℃，206 sec^-1 | 312 | Pa·s | ASTM D3835 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Drying temperature | 80 | °C | |
| Drying time | 3.0 | hr | |
| Barrel 1 zone temperature | 177 to 210 | °C | |
| Barrel 2 zone temperature | 182 to 216 | °C | |
| Barrel 3 zone temperature | 193 to 227 | °C | |
| Barrel 4 zone temperature | 193 to 227 | °C | |
| Barrel 5 zone temperature | 193 to 227 | °C | |
| Nozzle temperature | 193 to 227 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |