| About |
|---|
| SCHULINK® XL 350-S is a Crosslinked Polyethylene product. It can be processed by rotational molding and is available in North America. Primary characteristic: flame rated.&& |
| Product Description | |
|---|---|
| Supplier | A. Schulman |
| Generic | XLPE |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,HB |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.942 | g/cm³ | ASTM D792 |
| ESCR(Environmental Stress Cracking Resistance) | |||
| 100% non-ionic detergent, molded, F50 | > 1000 | hr | ASTM D1693 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| Yield, roll forming | 19.3 | MPa | ASTM D638 |
| Tensile strain | |||
| Fracture, roll forming | 350 | % | ASTM D638 |
| Bending modulus | |||
| 1% cut, roll forming | 703 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Izod notched impact strength | |||
| -40 ℃, 3.2mm, roll forming | 83 | J | ARM |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed, roll formed | 63.0 | ℃ | ASTM D648 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Any Color | HB | UL 94 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Compression Molded |
| 3. 2.0 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |