Scolefin 54 T 10

About
PP Homopolymer, 40% talc based, excellent balance of price and characteristcis, an idea solution for automotive parts, coloured upon request&&

Product Description
GenericPP homopolymerization
Material StatusCommercial: Active
FeaturesHomopolymer
AvailabilitysEurope

Technical Data
PHYSICALNominal valueUnitTest method
Density1.25g/cm³ISO 1183
Melt Flow Rate
230℃,2.16kg15g/10minISO 1133
Ash Content
625℃40%ISO 3451

MECHANICALNominal valueUnitTest method
Tensile modulus4000MPaISO 527-2
tensile strength
yield30.0MPaISO 527-2

IMPACTNominal valueUnitTest method
Charpy Notched Impact Strength
23℃2.0kJ/m²ISO 179/1eA
Impact strength of cantilever beam notch
23℃2.0kJ/m²ISO 180-1A

THERMALNominal valueUnitTest method
Hot deformation temperature
1.8 MPa, unannealed89.0ISO 75-2/A
Vicat Softening Temp
B5094.0ISO 306

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.