SECCO HD5401AA

About
SECCO HD5401AA is a High Density Polyethylene material. It is available in Asia Pacific. Primary attribute of SECCO HD5401AA: RoHS Compliant. Typical application of SECCO HD5401AA: Food Contact Applications&&

Product Description
Supplier	SECCO
Generic	HDPE
Material Status	Commercial: Active
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.951	g/cm³	ISO 1183
Melt Flow Rate
190℃，21.6kg	9.5	g/10min	ISO 1133
ESCR(Environmental Stress Cracking Resistance)	> 600	hr	ASTM D1693

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	26.0	MPa	ISO 527-2
Tensile strain
fracture	700	%	ISO 527-2
Bending modulus	1100	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Charpy Unnotch Impact strength	20	kJ/m²	ISO 179

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.