| About |
|---|
| SECCO LL0220AA is a Linear Low Density Polyethylene material. It is available in Asia Pacific. Primary attribute of SECCO LL0220AA: RoHS Compliant. Typical application of SECCO LL0220AA: Food Contact Applications&& |
| Product Description | |
|---|---|
| Supplier | SECCO |
| Generic | Linear low density polyethylene |
| Material Status | Commercial: Active |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.919 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 2.0 | g/10min | ISO 1133 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ISO 527-3 | ||
| MD, yield | 10.0 | MPa | ISO 527-3 |
| TD, yield | 11.0 | MPa | ISO 527-3 |
| MD, fracture | 36.0 | MPa | ISO 527-3 |
| TD, fracture | 28.0 | MPa | ISO 527-3 |
| Tensile strain | ISO 527-3 | ||
| MD, fracture | 1000 | % | ISO 527-3 |
| TD, fracture | 1200 | % | ISO 527-3 |
| Drop hammer impact | 110 | g | ISO 7765-1 |
| Elmandorf tear strength | ISO 6383-2 | ||
| MD | 1.5 | N | ISO 6383-2 |
| TD | 3.7 | N | ISO 6383-2 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |