SEETEC EVA EF443

About
Application Agricultural Film Feature Characteristics : Good Mechanical Properties, Good Optical Properties Additives : No Additive&&

Product Description
Supplier	LOTTE
Generic	EVA
Material Status	Commercial: Active
Features	Optical performance
Availabilitys	North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.930 to 0.934	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	0.90 to 1.3	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus
2% secant	44.1	MPa	ASTM D638
tensile strength			ASTM D638
fracture	31.4	MPa	ASTM D638
MD, fracture	31.4	MPa	ASTM D638
fracture	21.6	MPa	ASTM D638
Tensile strain			ASTM D638
fracture	700	%	ASTM D638
fracture	450	%	ASTM D638
fracture	700	%	ASTM D638

film	Nominal value	Unit	Test method
Drop hammer impact	> 400	g	ASTM D1709
Elmandorf tear strength
MD	200	g	ASTM D1922
tear strength
TD	200	g	ASTM D1922

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	72.0	℃	ASTM D1525
Melting peak temperature	90.0	℃	ASTM D3418

optical performance	Nominal value	Unit	Test method
gloss
45°	110		ASTM D2457
Haze	2.0	%	ASTM D1003

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.