SEETEC LLDPE UR744

About
Description UR744 is a butenecopolymer produced via Unipolprocess technology and suitable for rotational molding. Broad molding latitude, Good Grindability Good Color stability& ESCR Applications Rotational molding(Storage container)&&

Product Description
Supplier	LOTTE
Generic	Linear low density polyethylene
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,Butylene copolymer,High ESCR
Availabilitys	North America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.932	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	6.0	g/10min	ASTM D1238
ESCR(Environmental Stress Cracking Resistance)
F50	> 300	hr	ASTM D1693

MECHANICAL	Nominal value	Unit	Test method
tensile strength			ASTM D638
yield	15.2	MPa	ASTM D638
fracture	24.5	MPa	ASTM D638
Tensile strain
fracture	900	%	ASTM D638
Bending modulus	628	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	590	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	< -118	℃	ASTM D746
Vicat Softening Temp	110	℃	ASTM D1525
Melting temperature	122	℃

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.