SEETEC UF415 - SOLIAO

About
SEETEC UF415由Unipol工艺技术生产，具有良好的机械性能和光学性能以及良好的加工性能。

Product Description
Supplier	LOTTE
Generic	Linear low density polyethylene
Material Status	Commercial: Active
Features	Inoxidizability

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Melt index (190 ℃, 2.16 kg)	1.5	g/10min	ASTM D1238
Density	0.920	g/cm³	ASTM D792

film	Nominal value	Unit	Test method
tensile strength
MD, fracture	42.2	MPa	ASTM D882
TD, fracture	38.3	MPa	ASTM D882
tear strength
MD	240	g	ASTM D1922
TD	420	g	ASTM D1922

IMPACT	Nominal value	Unit	Test method
Drop hammer impact
23℃	165	g	ASTM D1709

optical performance	Nominal value	Unit	Test method
Haze	13	%	ASTM D1003
gloss
45°	72	%	ASTM D2457

Process Conditions
LLDPE blown film extruder	Nominal value	Unit	Test method
Mouth diameter	50	mm
temperature	180	℃
Mold gap	2.2	mm
BUR	2.1
FLH	32	cm

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.