| About |
|---|
| SEETEC UN414由Unipol工艺技术生产，具有良好的机械性能和良好的加工性能。 |
| Product Description | |
|---|---|
| Supplier | LOTTE |
| Generic | Linear low density polyethylene |
| Material Status | Commercial: Active |
| Features | Inoxidizability |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt index (190 ℃, 2.16 kg) | 2 | g/10min | ASTM D1238 |
| Density | 0.920 | g/cm³ | ASTM D792 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| Ultimate elongation | |||
| MD | 780 | % | ASTM D882 |
| TD | 800 | % | ASTM D882 |
| tensile strength | |||
| MD, fracture | 39.2 | MPa | ASTM D882 |
| TD, fracture | 34.3 | MPa | ASTM D882 |
| tear strength | |||
| MD | 200 | g | ASTM D1922 |
| TD | 360 | g | ASTM D1922 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Drop hammer impact | |||
| 23℃ | 140 | g | ASTM D1709 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Haze | 12 | % | ASTM D1003 |
| gloss | |||
| 45° | 72 | % | ASTM D2457 |
| Process Conditions | |||
|---|---|---|---|
| LLDPE blown film extruder | Nominal value | Unit | Test method |
| Mouth diameter | 50 | mm | |
| temperature | 180 | ℃ | |
| Mold gap | 2.2 | mm | |
| BUR | 2.1 | ||
| FLH | 32 | cm | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |