| About |
|---|
| SEPAZ™ C400TC是一种液晶聚合物（LCP）产品,。 它,在亚太地区有供货。 特性包括: 阻燃/额定火焰 传导性 绝缘&& |
| Product Description | |
|---|---|
| Supplier | Mando |
| Generic | 液态聚合物 |
| Material Status | Commercial: Active |
| Features | Thermal conductivity,Insulation,V-0 |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 2.69 | g/cm³ | ASTM D792 |
| Shrinkage rate | |||
| MD | 0.40 | % | ASTM D955 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 61.8 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 0.70 | % | ASTM D638 |
| Bending modulus | 12800 | MPa | ASTM D790 |
| bending strength | 90.2 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 32 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 243 | ℃ | ASTM D648 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | 1.0E+12 | ohms·cm | ASTM D257 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | V-0 | UL 94 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Processing (melt) temperature | 332 to 366 | °C | |
| Mold temperature | 66.0 to 121 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |