SEPTON™ 8104

About
SEPTON™ 8104 is a Styrene Ethylene Butylene Styrene Block Copolymer (SEBS) material. It is available in Asia Pacific, Europe, or North America.&&

Product Description
Supplier	Kuraray
Generic	SEBS
Material Status	Commercial: Active
Availabilitys	North America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.968	g/cm³	ISO 1183
Melt Flow Rate
200℃，10.0kg	1.0	g/10min	ISO 1133
styrene content	60.0	wt%
Solution viscosity
15wt% toluene solution, 30 ℃	80	mPa·s

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	98		ISO 868

elastic body	Nominal value	Unit	Test method
tensile strength
yield	32.8	MPa	ISO 37
100% strain	12.9	MPa	ISO 37
Tensile strain
fracture	500	%	ISO 37

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.